![]() ![]() so right before i gave up i right clicked on the left (the unmounted volume) and tried ejecting it.Ī message then read unable to eject disk, i pressed okay. sudo /usr/local/bin/ntfs-3g /dev/disk1s1 /Volumes/NTFS -olocal -oallowother. Running mount /dev/device /path/to/mountpoint may fail even if the ntfs3 driver is loaded, ensure the command is executed with -t ntfs3. I did not go into deep debugging but did add the ntfs-3g package and. I noticed the disk wasn't mounted as soon as i opened disk utility so i kept trying to mount it with no success. Fortunately, its easy to fix so that your external hard drive is no longer. My USB HD with NTFS was mounted and I could read it if I sudoed to root but mpd. I figured id open disk utility try to repair but it wouldn't repair id have to force eject which took a few extra seconds.Īfter doing this process for a while i got bored and just pulled the cord out a few times and BAM it wouldn't mount anymore and i thought my data was gone forever after all the threads i read So you have to prepend sudo to remount the mountable partitions of the disk. Mine was /dev/sdb1 I ran ntfsfix -b /dev/sdb1 and that fixed the problem. anyway i usually "eject" the disk when remove it but it got to a point where the hdd in question was giving me a message saying it couldn't eject because it was being used although it wasn't. 2 Answers Sorted by: 21 This is the thing that worked: I first needed to get ntfs-3g ( sudo apt-get install ntfs-3g) Run sudo fdisk -l to figure out where the mount point is. ![]() So before i start to explain the fix let me just clarify what was happening to me firstly i was transferring files from my hdd to another by copying them to my macbook then back to the other hdd because i only have one cord for the 2 hdd's. Okay so i had this problem today and was gunna shoot my self because of the data on my hd that i thought would be forever gone. It and mount a different device under the /dev/ Failed to mount /dev/sdb1: Input/output error NTFS is either inconsistent, or there is a hardware fault, or its a SoftRAID/FakeRAID hardware. Send the goflex drive back and get an external drive that does not need any extensions installed to operate. Parameter is very important! If the device is a SoftRAID/FakeRAID then NTFS is either inconsistent, or there is a hardware fault, or it's a Ntfs_attr_pread_i: ntfs_pread failed: Input/outputįailed to read of MFT, mft=1 count 1 br=-1: Input/įailed to open inode$MFTMirr: Input/output errorįailed to load $MFTMirr: Input/output errorįailed to mount '/dev/rdisk1s1': Input/output error WARNING: ReadFully - I/O error while reading from ![]() However, the volume I mounted is read only. At /Volumes/FRANCOIS because the following problem occured: 1 I got the impression from the MacFUSE site that when you install it and connect an NTFS volume it will be writable. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |